Overview:
Perform duties as directed by foreman while operating any or all of the following equipment: Backhoes, excavators, vibratory or static plows, trenchers or directional bore machines in the installation, removal or maintenance of underground utilities. Must have a valid drivers license. Must meet minimum requirements for DOT certification. Must hold a current hoisting license in the State of Massachusetts.
Responsibilities:
- Pre-trip equipment prior to operation of equipment. Check and maintain fluids in vehicle as directed. Grease vehicle as directed.
- Load material on equipment and secure as directed.
- Safely operate any or all of the following equipment: Backhoes, excavators, vibratory or static plows, trenchers or directional bore machines as directed.
- Participate in pre-job JHA (Job Hazard Analysis) on a daily basis.
- Report any unsafe conditions to your foreman.
- Operate tools as directed by foreman.
- Place, remove or maintain underground utilities as directed. This would include but not limited to carrying pipe, bags of cement and other heavy items. Jack hammering, shoveling, tamping and installing pipe, duct or cable
- At all times work in a safe manner
Machines, Tools, Equipment and Work Aids: Backhoes, excavators, vibratory or static plows, trenchers or directional bore machines, Jack Hammers, Chop Saws, Tampers, Rollers, Vibratory Plates, Water Pump, Air Ventilator, Gas Monitors, basic hand tools. Work Schedules and Hours:While work schedules and hours may vary somewhat depending on specific client locations and projects. In general, applicable work schedules include 5 8s. Work hours include beginning at approximately 6:00 a.m. and finishing around 4:00 p.m. One half hour lunch. Overtime as job dictates.Qualifications:
All successful candidates will have passed both a physical examination and drug / alcohol screen. Equipment Operator/Labor must have a minimum of a valid drivers license and be able to pass DOT physical along with a background check. Must be able to lift at least 90 lbs.