GENERAL ENGINEER
: Job Details :

Summary This position is located at Bureau of Engraving and Printing, within the Manufacturing Process Engineering Division DCF. As a GENERAL ENGINEER, you will apply mechanical, electrical, and industrial engineering knowledge and skills to sustain and improve existing banknote production processes and to integrate new production equipment and processes into BEP factories. Responsibilities The following are the duties of this position at the GS-13. If you are selected at a lower grade level, you will have the opportunity to learn to perform all these duties and will receive training to help you grow in this position. Analyze, solve problems, and improve all aspects of the banknote production process to sustain and improve safety, quality, reliability, and throughput. Prepare and analyze large structured and unstructured data sets, look for patterns, trends, and relationships, and create visualizations to extract knowledge and insights and implement solutions to solve manufacturing problems. Design experiments and conduct studies to assess and predict relationships between variables such as the relationship of material characteristics and production process parameters with finished product attributes. Design, document, produce, assemble, test, integrate, and validate new on-line and off-line inspection systems and other systems in a factory environment to enable banknote production. Independently construct detailed milestone reports on projects that are related to mechanical, electrical, industrial and/or other engineering disciplines. Requirements Conditions of Employment Veterans Preference does NOT apply to this Direct Hire announcement. The experience may have been gained in either the public, private sector or volunteer service. One year of experience refers to full-time work; part-time work is considered on a prorated basis. To ensure full credit for your work experience, please indicate dates of employment by month/day/year and indicate number of hours worked per week on your rsum. Key Requirements: Please refer to Conditions of Employment. Click Print Preview to review the entire announcement before applying. Must be U.S. Citizen or U.S. National SUITABILITY, CLEARANCE & REQUIREMENTS: A background investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by the Bureau of Engraving and Printing is very thorough. Therefore, it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination or immediate revocation of your interim clearance (if applicable). Qualifications You must meet the following requirements by the closing date of this announcement. Specialized Experience For the GS-13, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-12 grade level in the Federal service. Specialized Experience for this position includes: - Identifying problems, developing solutions, or implementing process improvements within a manufacturing environment; AND - Validating performance of implemented solutions in a manufacturing environment. (Examples of this experience may include: planning and conducting tests on manufacturing equipment OR measuring performance parameters on equipment OR analyzing data from a manufacturing process.); AND -Leading teams to solve problems. Specialized Experience For the GS-12, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-11 grade level in the Federal service. Specialized Experience for this position includes: - Identifying problems, developing solutions, or implementing process improvements within a manufacturing environment; AND - Validating performance of implemented solutions in a manufacturing environment. (Examples of this experience may include: planning and conducting tests on manufacturing equipment OR measuring performance parameters on equipment OR analyzing data from a manufacturing process.) Specialized Experience For the GS-11, you must have one year of specialized experience at a level of difficulty and responsibility equivalent to the GS-9 grade level in the Federal service. Specialized Experience for this position includes: - Identifying problems, developing solutions, or implementing process improvements within a manufacturing environment. OR Education: Ph.D. or equivalent doctoral degree, OR 3 full years of progressively higher level graduate education leading to such a degree, OR LL.M., if related, in an accredited college or university. OR Combination of experience and education. To combine education and experience, the total percentage of experience at the required grade level compared to the requirement, as well as the percentage of completed education compared to the requirement must equal at least 100 percent. Only graduate level education in excess of the first 36 semester hours (54 quarter hours) may be combined to be considered for qualifying education. Education Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) The education generally must be from an accredited (or pre-accredited) college or university recognized by the U.S. Department of Education. If you are qualifying based on foreign education, you must submit proof of creditability of education as evaluated by a credentialing agency. Refer to the OPM instructions. Additional Information OTHER INFORMATION: We may select from this announcement or any other source to fill one or more vacancies. This is a non-bargaining unit position. The facility typically shuts down annually between Christmas and New Year's Day. As such, all BEP employees must take leave for workdays during the shutdown period. CONDITIONS OF EMPLOYMENT: A one-year probationary period may be required. Public Trust - Background Investigation will be required. Complete a Declaration for Federal Employment to determine your suitability for Federal employment, at the time requested by the agency. This position requires that the successful candidate undergo personnel vetting, which includes a background investigation and enrollment upon onboarding into Continuous Vetting. Enrollment in Continuous Vetting will result in automated record checks being conducted throughout one's employment with Treasury. The successful candidate will also be enrolled into FBI's Rap Back service, which will allow Treasury to receive notification from the FBI of criminal matters (e.g., arrests, charges, convictions) involving enrolled individuals in near real-time. For more information about individual rights, Noncriminal Justice Applicant's Privacy Rights - FBI, FD-258 Privacy Act Statement - FBI, and SEAD-3-Reporting-U.pdf (dni.gov). Have your salary sent to a financial institution of your choice by Direct Deposit/Electronic Funds Transfer. If you are a male applicant born after December 31, 1959, certify that you have registered with the Selective Service System or are exempt from having to do so. Go through a Personal Identity Verification (PIV) process that requires two forms of identification from the Form I-9. Federal law requires verification of the identity and employment eligibility of all new hires in the U.S. File a Confidential Financial Disclosure Report within 30 days of appointment and annually from then on. Undergo an income tax verification. Obtain and use a Government-issued charge card for business-related travel. Submit to a drug test prior to your appointment and random drug testing while you occupy the position. Wear required safety clothing and/or equipment required by the position. This may include safety shoes, hard hats, hearing protection, gloves, masks, etc. Weekend work and overtime, if applicable, will be scheduled when needed based on production requirements as determined by Management.