Press Operator Apprentice
: Job Details :

SUMMARY: The Press Operator apprenticeship on the press line is a four-year program. The Press Operator apprenticeship will be responsible for learning correct procedures for set-up, operation, maintenance, and troubleshooting problems on all equipment on the press line. They must also learn how tosafely use all equipment on coating line. In order for the apprentice to remain in the program, they must demonstrate dependability, enthusiasm, cooperation and an ability to perform the duties of the job in an efficient and capable manner. Excessive lateness or absences result in the cancellation of the program. The apprentice must maintain a written log of work performed and other pertinent information. Must be the site leader in living and driving the Company Core Values and High-Performance Work Culture.ESSENTIAL DUTIES AND RESPONSIBILITIES:* Learn the proper use of tools and proper mechanical methods* Learn the Company's safety rules and participate in safety audits* Learn and understand Lockout/Tagout points for each machine* Learn fire protection plan and action (training and supervisory)* Learn responsibility for assigned maintenance schedule* Learn work order and production tracking systems* Display good housekeeping practices - must keep equipment and area clean and orderly* Report mechanical problems* Maintain and lubricate equipment* Make minor mechanical repairs to keep machinery running until full repair can be implemented* Be receptive to instructions, take notes, ask questions, and be pro-active* Must be able to use efficiently, micrometer and general tools* Follow company personnel and product safety requirements including standards such as those from SQF and internal GMP's* Willing to help wherever needed* Travel is required as needed for this position* Other duties as assignedSUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities.QualificationsQUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities require the following:* Operate the stacker on all lines* Recognize and Identify common coating and litho defects* Be Trained on the forklift* Operate the waxer* Mix Inks* Make plates* Feed on litho pressesEDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Better than average mechanical ability. Testing will be done to determine math and reading levels. Mechanical aptitude will be tested. Additional courses may be required as deemed necessary by management. Training will be done on the job and/or through courses at local schools and/or colleges. It may be necessary to attend classes outside of scheduled work hours. Successful completion of all classes is necessary for the apprentice to remain in the program.LANGUAGE SKILLS: Ability to read, write, and comprehend simple instructions, short correspondence, and memos in English. Ability to effectively present information in one-on-one and small group situations.MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure; using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage.REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to deal with problems involving several concrete variables in standardized situations.PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and sit; use hands and fingers to handle and feel; reach with hands and arms; climb, balance, and hear. The employee is frequently required to climb, balance, stoop, kneel, and crouch. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock and vibration. The noise level in the work environment is usually loud.NOTE: This job description identifies the general nature and scope of work to be performed. Independent Can reserves the right to revise all or any part of this job description and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Independent Can. This job description is subject to change based on the needs of the position and/or the Company.