Integrated Talent Strategies (ITS) is working with a manufacturing leader to find a Press Operator.
Prepare Press - Unbolt/ unclamp die
- Remove scrap and lubricant from the press
- Empty and clean buckets and barrels
- Clean bolster
- Repeat with each run
- djust arm jerkers
Set Die in Press - Push the die onto the bolster
- djust the die to the center
- Push the button to position the ram
- Bolt/ clamp upper half of die to ram (use socket wrench)
- Check die alignment
- Bolt/ clamp the lower half of the die to the bolster
Set Coil and Feed Length - Load coil (hoist or chain fall) onto reel or in the cradle
- Remove the banding on the coil by cutting with metal cutters
- Feed strip into the press feed
- ctivate the switch, advance the coil through the die
- Install lube line, air blow-offs, and chutes
Run Parts of Inspection Approval - Run press
- Check parts of gauging/ measuring
- Obtain inspection approval
Monitor Press - Check for proper feed
- Lubricate as necessary
- Check chutes, bolts, and parts being blown out
Document Statistical Process Control - Pick up part
- Measure part
- Return part to bin
- Record measurements
bout Integrated Talent Strategies (ITS) ITS is an international recruiting and staffing firm specializing in Engineering, Technical, and Professional positions. Founded in 1984 as a subsidiary of an engineering firm, ITS continues to remain a strategic partner for the job seeker. Our clients include some of the largest and most respected architectural, engineering, and manufacturing companies in business today. Our ability to offer a wide range of services, and the flexibility to adjust to the changing needs of our clients, has allowed us to maintain a solid reputation for several decades.