Process Technician - 1st, 2nd or 3rd Shift
Responsibilities include, but are not limited to:
- Manufacture First Piece and support quality to perform first piece approval.
- Assure that Operation Procedures are followed. Propose changes as required.
- Assess quality of product and adjust the process as needed within predetermined limits.
- After forced shut down, assess safety and functionality of equipment and restart in automatic mode (E Stop, Machine Fault)
- Monitor and document process control parameters and adjust process as needed within pre-determined limits. Maintain process change log.
- Trouble- shoot minor (mechanical) machine and tooling issues. This includes, but is not limited to: Re-attach loose components, Remove debris, dirt and oil, Replace air /hydraulic fittings and other easy to reach components (seals, O rings, ), Maintain issue log
- Assess reason for machine break down, issue INFOR work order and coordinate repairs with maintenance and supervisor.
- Perform start up and shut down procedure
- Execute contingency procedures.
- Perform Technician driven Reliability activities and document those in INFOR.
- Refill/ Replace raw materials and other consumables (Foam, Glue, Lubricants)
- Shut down process due to safety or quality issues in coordination with Supervisor
- Keep machines and auxiliary equipment clean and in working order.
- Support Process Improvements as directed by the Process Engineer
- Perform tool changes as directed by the Supervisor utilizing approved procedures
Requirements:
- 2-3 years Automotive experience
- Associates Degree
Preferred Experience:
- 2-3 years Cold Knife Scoring: Basic Troubleshooting of vacuum systems
- 2-3 years Foaming: Exchanging Iso / Polyol, Troubleshooting / calibration mix heads, Homing ABB robots, Seal time adjustments, Troubleshooting quality defects (voids, dents, etc.)
- Keyence Vision systems