Summary:
The Raw Receiving Laborer's main focus of responsibility is to operate the Raw Receiving area according to established guidelines. Keep all equipment and raw product maintained, in good condition, and free from hazards that may affect personnel safety or product quality.
Position Duties and Responsibilities:
- Complete Raw Receiving reports and Tare Sheets legibly and
- Oversee the unloading of all raw product, including ensuring all loads are properly and promptly
- Oversee the rotation of receiving bays to always ensure the best use of raw
- Keep raw product separated per management direction; sort and maintain a separation of incoming raw potatoes by sugar levels, separate foreign materials, rocks,
- Ensure the sugars are tested for each supplier and recorded Ensure samples are taken to the Lab for testing of definite sugar levels.
- Check all solids for every supplier a minimum of once a
- Assist maintenance personnel in the Raw Receiving area by writing work orders for needed
- Keep waste pit clean, placing waste in the proper areas in a neat and orderly Clean receiving areas.
- Immediately report problems to the Raw Receiving Communicate daily on repairs needed or repairs made.
- Inform proper management personnel of problem loads when Reject loads if the Company standards or requirements are not met.
- Use caution around moving parts and
- Comply with all safety regulations; follow all Company and safety
- Know and follow all Company and regulated good manufacturing
- Completes all other responsibilities as necessary and
Knowledge and Skills:
- Ability to read and write legibly in
- Willingness to work in inclement weather
- Able to perform standard dirt, rot, green tare, and specific gravity testing on incoming raw potatoes.
- Must be able to closely follow operational instructions and work with minimal
- Ability to communicate
- Good attention to
Education:
Education must be of such level as to allow for the accurate reading, writing, calculation and communication of the required materials and instructions to complete the job responsibilities of the Raw Receiving Laborer position.
Physical Requirements:
- Will be required to stand, bend, or move repetitively for up to 12
- Must be able to lift on a regular basis up to 50 pounds without
- Able to tolerate dust or
- Must not be affected by moving equipment and
- Able to climb vertical
- Able to use a shovel as
- Bending, stretching, lifting, reaching, climbing, crawling, and crouching as
- Must be able to work weekends, holidays, and overtime as
Supervisor Duties:
The Raw Receiving Laborer has no supervisory authority. Will report to the Raw Receiving Manager.
Working Conditions:
Normal plant/ manufacturing environment. Hours of operation are 12 hours a day, 5 to 6 days a week. The Raw Receiving Laborer must be available all days and all hours. Position is very physical/ hands on. Will be exposed to high levels of noise, low-lit areas, extreme heat or cold, steam, dust, and wet, humid, and slick conditions, and all other environmental factors normally attributed to a manufacturing environment.
Disclaimer:
The purpose of this Job Description is to document the major aspects of this position. This description should not be construed as all-encompassing or as an exhaustive list of the responsibilities, skills, efforts or working conditions necessary for this position. Idaho Pacific reserves the right to make changes and modifications to this description, associated duties, and requirements as necessary.
Idaho Pacific Holdings is an Equal Opportunity Employer/ M / F / Disabled /V.
Job Posted by ApplicantPro