Sintering Technician
: Job Details :

Job Summary:Assist supervisors by facilitating communication throughout operations. Maintaining quality and safety standards on all sintering furnaces and equipmentJob Duties and Responsibilities:

Correctly perform the following activities

Must be able to read and interpret a control plan

Must be able to enter and print an NCMR

Verification and use of micrometers

Verification and use of indicators

Verification and use of weight scales

Setup and operate bench centers for Runout check and report

Setup and operate indicator for perpendicularity check

Setup and operate all density scales

Setup and operate all hardness testers

Setup and operate Comparator

Setup and operate Mitutoyo height indicators/surface plate

Visual inspection of compaction

Visual inspection of sintered part (includes metallographic analysis)

Set up and operate CMM, measure and report:

Outside Diameter

Inside Diameter

Spherical Diameter

Roundness of above features

Perpendicularity

Flatness

Position

Concentricity

Width

Change CMM probes and calibrate on manual and DCC machines as well as train others on equipment

Setup and operate snap gauge

Specific Duties and Responsibilities:

Follow all established safety regulations and procedures.

Setup, monitor, and operate all Sintering equipment as needs require.

Advise supervisor, or Operations Facilitator of any part, equipment, and process difficulties.

Follow all instructions as provided on process control plans and any reference documents.

Quality checks based on assigned level of capability.

Gaging care and verification.

Routine cleaning, care of machines, gages, and other equipment used.

Perform inspections for In-Process of existing and new product as required (includes destructive tests, & nondestructive tests)

Use all available gauging to decide fit of product - will include both setup and operation of gauging

Inform supervision of out-of -tolerance conditions

Audit product, process and documentation at furnace areas as required by existing control plans

Verify setups as required

Complete necessary records both written and electronic

Participate in scheduling/prioritizing of work as required through working with master scheduler.

Learn new gauging/techniques as acquired

Perform other duties as assigned

Inspect and/or sort parts as required.

Record keeping (SPC charts, Production reports, Product Routers, etc.)

Follow all standard work for autonomous maintenance.

Participates in ongoing training and continuous improvement activities.

Skills Executed:Communication, multi-tasking, efficient organization of multiple tasksEducation: High School Graduate / GEDSafety Requirements: When required in specific areas. This includes, but is not limited to safety glasses, with side shields, hearing protection, and gloves.Physical Demands:Key: Rarely: Less than 5 minutes Occasionally: 5minutes - 2 hours Frequently: 2 hours - 5 hours Constantly: 5 hours - 8 hoursPhysical DemandFrequencyPhysical DemandFrequencyStandingCBalancingOWalkingCCrawlingRSittingOKey Punching (Typing)RTwistingCHearingCLiftingCSpeakingCPushingCVisualCClimbingOHandlingCKneelingOReachingCCarryingFDriving (Required OJT)FBendingFMachine/Equip,UsedCSquattingFSecond Shift:Monday - Friday: 3:00pm to 11:00pmAdditional hours may be needed to fulfill role.